After a snow storm it’s always good to find out ‘how much they received’. Here are Colorado Ski Resorts Powder Level Cameras which are periodically updated to see how much has accumulation. Many are date stamped and are cleared at … Read the rest
Side wall removal is necessary to allow the edge cutting tools to cut or polish the edges. If you are seeing plastic in your files or stones, it’s time for you to remove the side wall where the top of … Read the rest
The old adage “Measure Thrice, drill once” is applied to measuring, drilling and mounting bindings. A necessary part of the process is to double check ski mounting lines on both skis to verify accuracy. This step is typically overlooked when … Read the rest
TOOLS4BOARDS TUNING STATION KIT (SAVE THESE INSTRUCTIONS)
Waxing Skis and Snowboards
• Always wax in a well ventilated area.
• Never leave wax iron on unattended.
• Use ski and … Read the rest
Xact All-in-one sharpens and bevels side edge, base edge and trims excess side wall. Simply turn knob to clamp file, or pull and turn knob to adjust bevel angle. Patented adjustment feature provides simple and accurate bevel angles. Ceramic … Read the rest
One of the few things consistent between all of the various shapes, sizes, side wall and top sheet shapes, binding locations, and camber/rocker, etc of skis and snowboards is that they are symmetrical relative to their longitudinal centerline.
Finding the … Read the rest
Here is SVST’s Epoxy Chart:
Hardman’s Recommended use Chart: … Read the rest