Individual Stainless Steel M5 machine screws for Binding Freedom & Quiver Killer inserts.
Available sizes:
Flat-heads: 10, 12, 14, 16 & 18mm
Low-heads: 8, 10, 12, 16, 20, 22 & 26mm
Small-heads: 8mm (limited 18mm remaining)
(Note: Pozi Small-head sizes 10, 12, 14, 16 & 18mm are no longer being manufactured or available after our current supply sells out. Substitute with pozi-Flat-head screws.)
Click here for a Binding Freedom Pozi Screw Length Guide
Click here for Measuring for Binding Screws, Drill Bits and Taps
Note, longer screws can be shortened by grinding or filing.
Pozi Flat-head
We've tooled up our own custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is tapered and fits like a flathead screw, but with a smaller diameter head so that they fit bindings which require a smaller diameter clearance. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver.
Pozi Low-head
Binding Freedom has tooled up custom M5 screws specifically made for mounting ski bindings to swap plates or inserts. The head is flat underneath and fits like a buttonhead screw. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver.
Pozi Small-head
The head is tapered and fits like a flathead screw, but with a smaller diameter head (8.5mm) so that they fit bindings which require a smaller diameter clearance. The underside of the head has locking serrations to help ensure that the screw doesn't back out over time. High quality stainless steel. For use with a Pozi #3 phillips head screwdriver.
(Note: Supply of Pozi Small-head screws are limited. You can quickly make your own by putting a plastic screw anchor in a drill check, insert a Low-head screw and spin it against a stone or file until you reach your desired diameter (+/-8mm).
