Following is a ‘guide’ for determining required M5 pozi machine screws for Binding Freedom (or Quiver Killer stainless steel
inserts). Measure and self-verify screw lengths needed. If in doubt purchase addition lengths and back ups. Longer screws can be ground to shorter lengths if needed.
Here is a ‘cheat sheet’ showing Binding Freedom Pozi-Drive Screws and how to measure them correctly.
(from Binding Freedom, U.N.O., as of 10/20/15.)
Tips on Measuring your bindings for screw lengths
-Smallhead screws are measured as the total length of the screw less 2mm, while lowhead screws are measured as the length of just the threads
-Fasteners should protrude 4mm MIN and 6mm MAX into a threaded insert.
-To determine the idea fastener length, press an existing screw into the binding hole. Make sure it has bottomed out in its hole. Measure how far it protrudes below the base of the binding.
-Measure the screw itself as well. Subtract the protrusion length from the length of the screw. Add 5mm to that length. Find the closest size fastener that is within 1mm of that number. In this example, 13mm – 9mm + 5mm = 9mm. Either an 8mm or 10mm flathead would be appropriate for this binding.
22 Designs:
❅-Axl/Vice/Hammerhead
•16 – 10mm low heads
7TM:
❅-Garmont tour
•8 – 18mm small heads
❅-Power tour
•4 – 20mm small heads (new small heads length will be released this winter to address the lack of this size – you can source your own M5 screw for now)
•4 – 18mm small heads
•4 – 14mm small heads
ADRENALINE AND LIKE BINDINGS:
❅No fit – the binding uses a stepped screw that we currently can not match.
BLACK DIAMOND:
❅ O1
•14 – 14mm small heads
CAST TOURING SYSTEM:
❅-Toe Plates
•8 – 12mm small heads
❅-Heel lengths will vary per binding. Add 6mm length to the M5 screw needed for your bindings heel screws.
DYNAFIT:
❅-Comfort
•10 – 16mm small heads
•8 – 10mm lowheads
❅-Vertical ST
•10 – 16mm small heads
•8 – 10mm low heads
❅-Vertical FT
•8 – 12mm small heads
•10 – 16mm small heads
❅-Radical ST/FT
•8 – 16mm small heads
•8 – 10mm low heads
❅-Speed Turn/Speed Radical
•10 – 12mm small heads
•8 – 10mm low heads
❅-TLT Speed
•10 – 10mm small heads
•8 – 10mm low heads
❅-Beast 14
•8 – 12mm small heads
•8 – 14mm small heads
❅-Beast 14 (Binding Freedom screws are not compatible with this binding. We are currently trying to produce a new screw with pozi head that will function with this binding. This screw is still in the production phase and for now you will have to source your own M5 thread screws from a hardware store)
❅-8 – 12mm small heads
❅-8 – 14mm small heads
❅-Dynafit Beast 16 (Binding Freedom screws are not compatible with this binding. We are currently trying to produce a new screw with pozi head that will function with this binding. This screw is still in the production phase and for now you will have to source your own M5 thread screws from a hardware store)
•4 – 10mm countersunk flat heads with head diameter reduced to 8mm
•8 – 16mm countersunk flat heads with head diameter reduced to 8mm
•8 – 12mm countersunk flat heads with head diameter reduced to 8mm
❅-Dynafit Radical 2 ST & FT
•16 – 14mm small heads with head diameter reduced to 8mm
FRITSCHI:
❅-Titanal
•14 – 8mm small heads
❅-Freeride +
•10 – 10mm small heads
•6 – 16mm small heads
❅-Explorer
•14 – 12mm small heads
❅-Pro
•8 – 12mm small heads
•6 – 16mm small heads
❅-Eagle
•8 – 12mm small heads
•6 – 16mm small heads
❅-Experience
•8 – 8mm small heads
•6 – 12mm small heads
❅-Vipec 12
•8 – 10mm small heads
•8 – 12mm low heads (coming soon)
G3:
❅-Enzo
•12 – 14mm small heads
❅-Targa
•12 – 12mm small heads
❅-Accent
•8 – 10mm small heads
•4 – 12mm small heads
•4 – 18mm small heads
❅-Onyx
•10 – 8mm small heads
•8 – 10mm low heads
❅-ION
•8 – 12mm (or 14mm) small heads
•8 – 10mm (or 12mm, cut from 16mm) low heads
GARMONT:
❅-7tm Power Tour
•4 – 14mm small heads
•8 – 18mm small heads
LOOK:
❅-XM
•20 – 10mm flat heads (screw coming soon – if ordering for this binding its best to source your own 10mm counter sunk screws. Our Small head screw gets in the way of the heel release function. Our new flat head screw being introduced for next season will eliminate this problem)
❅-Pivot 18
•12 – 10mm low heads
•4 – 20mm low heads
❅-Pivot 14 (13/14 and newer)
•8 – 18mm small heads
•4 – 10mm low heads
•4 – 16mm low heads
❅-Pivot 14 (12/13 and older
•4 – 14mm small heads
•4 – 16mm small heads
•4 – 10mm low heads
•4 – 16mm low heads
❅-PX14
•4 – 14mm small heads
•4 – 16mm small heads
•4 – 8mm low heads
•4 – 22mm low heads
❅-PX12 Demo
•8 – 8mm small heads
•12 – 14mm small heads
M EQUIPMENT:
❅-Medijo
•14 – 12mm small heads
•4 – 16mm small heads
•8 – 18mm small heads
MFD:
❅-All Time
•8 – 8mm small heads
•8 – 10mm small heads
MARKER:
❅-Kingpin (Binding Freedom screws are not compatible with this binding. We are currently trying to produce a new screw with pozi head that will function with this binding. This screw is still in the production phase and for now you will have to source your own M5 thread screws from a hardware store)
•8 – 10mm countersunk flat heads with heads reduced to 8mm diameter
•6 – 12mm countersunk flat heads
•4 – 18mm countersunk flat heads
❅-Duke/Baron/F10/F12 (2011 & Newer)
-18 – 10mm small heads
❅-Duke/Baron/F10/F12 (2010 & Older)
•16 – 10mm small heads
•2 – 8mm low heads
❅-Lord SP14
•8 – 8mm small heads
•4 – 8mm low heads
•4 – 16mm low heads
❅-Schizo/Demo
•10 – 10mm small heads
•8 – 8mm low heads
❅-Jester, Griffon or Squire (H18mm AFD’s & H10 x L200mm heel base plate):
•8 – 8mm small heads
•4 – 16mm small heads
•4 – 8mm low heads
❅-Jester Pro 18, Jester, Griffon or Squire (H21mm AFD’s & H13 x L240mm heel base plate):
-4 – 16mm small heads
-12 – 8mm low heads
PLUM:
❅-Yak
•16 – 10mm small heads
❅-Guide
•8 – 10mm small heads
•8 – 12mm small heads
ROSSIGNOL:
❅-FKS (With geze 4 hole toe)
•4 – 10mm small heads
•4 12mm small heads
•4 – 10mm low heads
•4 – 16mm low heads
❅-FKS/FKX
•4 – 14mm small heads
•4 – 16mm small heads
•4 – 10mm low heads
•4 – 16mm low heads
❅-FKS 14/140
•8 – 18mm small heads
•4 – 10mm low heads
•4 – 16mm low heads
❅-FKS 18/180
•12 – 10mm low heads
•4 – 16mm low heads
ROTTEFELLA:
❅-NTN Freeride (12/13 & Newer)
•12 – 10mm small heads
•4 – 8mm low heads
❅-NTN Freeride (11/12 & older
•12 – 8mm small heads
•4 – 8mm low heads
❅-NTN Freedom
•4 – 8mm small heads
•2 – 12 mm small heads
•4 – 8mm low heads
•12 – 10mm low heads
SALOMON:
❅-STH 2 WTR
•8 – 20mm small heads (20mm screw is not yet available but will be introduced for the 15/16 season, you can source your own screws for now)
•8 – 12mm small heads
❅-Warden
•8 – 12mm small heads
•8 – 16mm small heads
❅-Guardian
•8 – 10mm flat heads
•12 – 12mm flat heads (screw coming soon – if ordering for this binding its best to source your own 10mm counter sunk screws. Our Small head screw gets in the way of the heel release function. Our new flat head screw being introduced for next season will eliminate this problem)
❅-914/916/STH916
•2 – 12mm small heads
•4 – 14mm small heads
•6 – 16mm small heads
•4 – 26mm low heads
❅-STH12/STH14/Z
•4 – 12mm small heads
•2 – 14mm small heads
•6 – 16mm small heads
•4 – 20mm low heads
❅-STH14 Driver (2011 & newer) NOT STH2
•4 – 12mm small heads
•10 – 16mm small heads
•4 – 26mm small heads
❅-912 Ti
•12 – 18mm small heads
•4 – 26mm low heads
SILVRETTA:
❅-500 Easy
•14 – 10mm small heads
❅-400
•16 – 8mm small heads – the diameter of the screw will will need to be ground down to 8mm to fit
TYROLIA:
❅-Attack
•4 – 8mm low heads
•8 – 10mm lowheads
•4 – 18mm low heads (coming soon – sub in a 20mm and grind down for now)
❅-Peak 15
•4 – 8mm low heads
•4 – 10mm low heads
•4 – 12mm low heads (coming soon)
•4 – 16mm low heads
❅-Peak 12/Mojo 12
•4 – 14mm small heads
•4 – 10mm small heads
•4 – 16mm small heads
•4 – 18mm small heads
VOILE:
❅-Switchback
•12 – 14mm small heads