Install your Threaded Stainless Steel Inserts with this Shoulder screw and 3mm hex driver. Use the driver to install and remove 3mm socket binding screws the 3mm hex bit driver bit. The hex nut can be used as a jam nut to help with tool removal from the insert or insert removal. The hex bit will work in ratchet drivers or electric drills. The shoulder screw can also be used to install inserts by hand.

Metric 18-8 Stainless Steel Precision Socket Shoulder Screw, 3mm Hex, M5 Thread works with both Binding Freedom and Quiver Killer stainless steel threaded inserts.

Tip: after driving the insert into the tapped and epoxied, 1/4" hole, back it out quickly to 'disengage' from the insert. Otherwise, the insert may back out as well.