Connect & follow

Store Departments:

 

Minicart:

0 Product(s) in cart
Total $0.00
 

Client Login:

Login Status  Login Status
Not logged in
 

Newsletter Signup:

 

Recently Viewed:

 

Our products

SVST Alpine Binding Screws-20Pk
  (Enlarge)  

SVST Alpine Binding Screws-20Pk

Nine of the most popular alpine screw sizes and lengths and nylon tap-in inserts. Screws are measured from tip to top. Price per each.

Whether you lost a screw, adding shims, have a tear out or want to swap bindings between multiple skis, we have any array of options to help you do it yourself.

Please note it is impossible for us be on top of every screw head type, length, shims, cants, rail system, and nuances for every binding and situation. Generally, we cannot afford the time required to field numerous questions related to binding screws. So please try to resolve screw issues prior to calling or emailing.

Visit our Tips and Support Weblog for more insights on mounting, binding and screw questions.

The Binding Freedom machine screw chart is a reference that may help you compare lengths and head types.

Here are some tips to help you answer your own questions:
  • Screws are relatively cheap and can be modified to some degree. Order additional lengths and types if in doubt.
  • Flathead Screws are measured from tip to top. Pan heads, buttons and sockets are measured from tip to bottom of the head.
  • The screws shown on this page are what we have in stock and can acquire for your convenience.
  • Older skis probably used longer screws as the skis were thicker and newer skis typically require shorter screws.
  • The thread pitch is unique to binding screws and optimized for skis and snowboards. A typical hardware store machine screw is NOT a recommended alternative.
  • Tapping metal top sheets or mounting plates is highly recommended. Some also recommend tapping non-metal top sheets.
  • Glue can fill in a deeper hole than screw length.
  • Minimum screw depth is 6mm/4 thread bite into ski
  • The alpine screw heads are 10mm and can be ground to a smaller diameter If you need longer screws, stainless steel inserts for M5 x .8mm pitch machine screws are an excellent option

Alternatives and procedures for measuring (calipers are best):

  • Measure existing screw if available
  • Measure existing hole diameters
  • Place screws in bindings to help determine binding thickness and screw projection
  • Measure hole depths (calipers have depth gauges)
  • Is the screw a flathead, tapered or have a shoulder (panhead)?
Product ID: SVABS-20pk
Price: $9.89
12.23 CAD 8.84 EUR 12.86 AUD
Binding Screws-20pk:
5.5 x 9.5mm Flathead
5.5 x 11.5mm Flathead
5.5 x 13mm Flathead
5.5 x 15mm Flathead
5.5 x 16mm Flathead
5.5 x 18mm Flathead
6.2 x 17.5mm Flathead
5.5 x 21.5mm Flathead
5.5 x 28mm Panhead
Nylon Tap-In Inserts
Quantity:
 
Product Reviews

No Reviews For This Product.

Click to review this product

 

Tips & Info Sections:

 
 
 

Tips & Info Archives: