http://www.slidewright.com/ PHP ECT RSS Feed Generator v2.1 by DataLinks Software Solutions (www.dlss.ca) Like base repair & prep, edge tuning and waxing your skis and snowboards, keeping your bikes, packs, boats, boots and support gear, cleaned, repaired and tuned, improves performance, reliability and prolongs usable life while staying fit, enjoying your year-round outdoor interests ('Cross Pursuits') and special places. An ounce of prevention and routine maintenance will also save you money, time, headaches and increase the fun factor and overall satisfaction. http://www.slidewright.com/parktool-1002-clamp-cover-set-100-3x-100-5x_tl5235.html http://www.slidewright.com/parktool-1002-clamp-cover-set-100-3x-100-5x_tl5235.html Fits 100-3X and 100-5X extreme range clamps only. Includes a pair of black covers with double cable reliefs. Each set includes four circlips. http://www.slidewright.com/parktool-106-work-tray_tl8309.html http://www.slidewright.com/parktool-106-work-tray_tl8309.html A great work stand accessory built to keep tools, lubes and spare parts close at hand. The #106 installs directly and easily utilizing our exclusive receiver pod accessory system found on the PRS-25, PRS-15, PCS-10 and PCS-11 Repair Stands.Note: Use the #106-AC Accessory Collar (available separately) to fit the 106 tray on the PCS-9.  The 106AC is also required for the PCS-1 or PCS-4 when used with height extension and composite top tube assembly and height extension. Two versatile compartments Integrated tab system holds plastic market bag for trash Universal tool/towel bar Two receiver pods to accept accessories http://www.slidewright.com/parktool-106-ac-accessory-collar_tl8310.html http://www.slidewright.com/parktool-106-ac-accessory-collar_tl8310.html Easily adapts the PCS-9, and post-2003 models of PCS-1 and PCS-4, to accept the #106 Work Tray or PTH-1 Paper Towel Holder.  The 106-AC fits the 1-3/8" tubing used on the PCS-9, and on the height extensions uses on the post-2003 models of the PCS-1 and PCS-4. http://www.slidewright.com/parktool-1185k-clamp-covers-for-pcs-9-10-11-12_tl8579.html http://www.slidewright.com/parktool-1185k-clamp-covers-for-pcs-9-10-11-12_tl8579.html Fits clamps on the repair stands PCS-9, PCS-10 and PCS-11. http://www.slidewright.com/parktool-1259-clamp-cover-set-100-4x-6x-15x_tl5236.html http://www.slidewright.com/parktool-1259-clamp-cover-set-100-4x-6x-15x_tl5236.html Fits clamp jaws of the 100-4X, 100-6X, and 100-15X (used on the PRS-15). http://www.slidewright.com/parktool-466-rubber-replacement-clamp-cover-set_tl5230.html http://www.slidewright.com/parktool-466-rubber-replacement-clamp-cover-set_tl5230.html Fits the older clamps with plastic-dipped jaws. Plastic cover should be removed before installing new covers. http://www.slidewright.com/parktool-467b-clamp-cover-set-single-groove_tl5231.html http://www.slidewright.com/parktool-467b-clamp-cover-set-single-groove_tl5231.html Fits PRS-2 through PRS-8 with single cable relief in jaw. Simply discard old covers and install new covers; each set includes two circlips.For older professional series stands only; not for our current model stands. http://www.slidewright.com/parktool-467g-clamp-coverset-pcs-1-2w-groove_tl5232.html http://www.slidewright.com/parktool-467g-clamp-coverset-pcs-1-2w-groove_tl5232.html Fits PCS-1 and PCS-2 with single cable relief. Simply discard old covers and install new covers; each set includes two circlips. For older PCS-series stands only; not for our current model stands. Contact us for more information. http://www.slidewright.com/parktool-468b-clamp-cover-set-w-2-groove_tl5233.html http://www.slidewright.com/parktool-468b-clamp-cover-set-w-2-groove_tl5233.html This is the common shop stand jaw cover. Clamp models that use these covers are the 100-3C, 100-5C, and 100-8C clamps. Simply discard old covers and install new covers; each set includes two circlips.Fits the following stands with double cable reliefs: PCS-4 PRS-2 PRS-2OS PRS-3 PRS-3OS PRS-4 PRS-4OS PRS-5 PRS-6 (made after 1996) PRS-7 PRS-8 http://www.slidewright.com/parktool-468g-clamp-coverset-pcs-1-2-w-2groove_tl5234.html http://www.slidewright.com/parktool-468g-clamp-coverset-pcs-1-2-w-2groove_tl5234.html Fits PCS-1 and PCS-2 with double cable relief. These are the clamp models 100-1C, 100-1CA, and 100-2C. Simply discard old covers and install new covers; each set includes two circlips. http://www.slidewright.com/parktool-asc-1-anti-seize-compound-4oz_lu2056.html http://www.slidewright.com/parktool-asc-1-anti-seize-compound-4oz_lu2056.html http://www.slidewright.com/parktool-aws-11c-hex-wrench-set-3-6-8-10mm_tl5008.html http://www.slidewright.com/parktool-aws-11c-hex-wrench-set-3-6-8-10mm_tl5008.html The Park Tool Fold Up Hex Wrench Set combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles. Includes 13mm, 4mm, 5mm, 6mm, 8mm, and 10mm hex wrenches Made from Bondhus Protanium™ high torque industrial steel for long life Chamfered tips for a perfect fit http://www.slidewright.com/parktool-aws-12c-metric-sae-hex-set_tl5009.html http://www.slidewright.com/parktool-aws-12c-metric-sae-hex-set_tl5009.html The Park Tool Fold Up Hex Wrench Set combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles. The AWS-12 combines metric and "English" (SAE) fractional wrenches. Includes 2mm, 3mm, 4mm, 5mm ,6mm, 3/16", 7/32", and 1/4" wrenches Made from Bondhus Protanium™ high torque industrial steel for long life Chamfered tips for a perfect fit http://www.slidewright.com/parktool-aws-3c-hex-set-2-2-5-3mm_tl5004.html http://www.slidewright.com/parktool-aws-3c-hex-set-2-2-5-3mm_tl5004.html Park Tool introduced the bicycle industry to the 3-way Hex Wrench Set more than 20 years ago. Our latest versions are stronger and more comfortable than ever. They fit perfectly in the palm of the hand and provide tremendous leverage.  2mm, 2.5mm, and 3mm hex set Made from Bondhus Protanium™ high torque industrial steel; heat treated for long life Chamfered tips for a perfect fit http://www.slidewright.com/parktool-aws-8c-balldriver-hex-set-4-5-6mm_tl5005.html http://www.slidewright.com/parktool-aws-8c-balldriver-hex-set-4-5-6mm_tl5005.html Park Tool introduced the bicycle industry to the 3-way Hex Wrench Set more than 20 years ago. Our latest versions are stronger and more comfortable than ever.Note: Balldrivers are not intended for high torque situations. 4mm, 5mm, and 6mm hex set Color coded rings to quickly find the correct size Made from Bondhus Protanium™ high torque industrial steel; heat treated for long life Bondhus Balldriver tips to access hard-to-reach areas http://www.slidewright.com/parktool-bbb-2-big-blue-book-2nd-edition_tl5260.html http://www.slidewright.com/parktool-bbb-2-big-blue-book-2nd-edition_tl5260.html Updated to include new topics, techniques and equipment. Packed with hundreds of photos and hundreds of procedures, the BBB-2 provides both the novice and veteran mechanic the information needed to perform nearly any repair from trailside repairs to complete overhauls. Written by Park Tool Director of Education Calvin Jones, the Big Blue Book is the perfect reference guide and step-by-step repair manual for nearly any bike, including road, mountain, BMX, and single-speed. We wrote the book on bicycle repair. http://www.slidewright.com/parktool-bbt-18c-bottom-bracket-tool-shim-isis-8-notch_tl5292.html http://www.slidewright.com/parktool-bbt-18c-bottom-bracket-tool-shim-isis-8-notch_tl5292.html The BBT-18 is a heavy duty, investment cast tool for installing and removing the following eight-notch bottom bracket cups: Shimano ISIS Drive ISIS OverdriveNote: The BBT-18 is an updated version of the current BBT-8. The outside diameter of the tool has been changed so it provides a universal fit on all Shimano and ISIS Drive eight-notch cups.+The BBT-18 has 8 notches with an outside diameter of nominally 43.4mm. The inside-to-inside width is approximately 38mm. Each notch is approximately 3.9mm wide.  The hole in the center of the casting is 22.5mm, and will not fit over the 30mm spindles. http://www.slidewright.com/parktool-bcb-4-bike-cleaning-brush-set_tl5016.html http://www.slidewright.com/parktool-bcb-4-bike-cleaning-brush-set_tl5016.html A clean bike looks great, performs better, lasts longer, and is easier to maintain. Now with the BCB-4 Bike Cleaning Brush Set, having a clean bike is easier than ever. “Sure Grip” dual density handles insure a positive grip even with wet hands.The BCB-4 contains four brushes, each specially designed for a specific cleaning purpose: Double-ended gear cleaning brush Tire and frame tube cleaning brush Frame cleaning sponge brush Tapered detail brush http://www.slidewright.com/parktool-btr-1-tool-roll_tl8311.html http://www.slidewright.com/parktool-btr-1-tool-roll_tl8311.html Ride saving essentials in a tight tool roll, perfect for just about any rider. The BTR-1 features the essential tools needed to fix a flat and make trail or roadside adjustments - all wrapped in a well-organized, protective tool roll. Just the right size to slide into most medium to large sized saddle bags and wedge packs. The BTR-1 includes the following: Nylon tool roll with cinch strap PMP-3 Pocket Protector Micro Pump IB-1 I-Beam Fold-up tool set GP-2 Pre-Glued Patch Kit TL-4 Tire Lever Set TB-2 Emergency Tire Boot High pressure inflation gauge http://www.slidewright.com/parktool-cb-2-chainbrite-cleaner-16oz_lu2050.html http://www.slidewright.com/parktool-cb-2-chainbrite-cleaner-16oz_lu2050.html Biodegradable Citrus ChainBrite is specially formulated for use in the Cyclone Chain Scrubber. It quickly removes the toughest grease and grime buildup, yet won’t harm alloy, plastic or rubber parts. Also works great as a general purpose parts cleaning fluid. Flip-top lid makes pouring easy.Use CB-2 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. http://www.slidewright.com/parktool-cbw-1c-brake-wrench-8-10mm-open-end_tl5027.html http://www.slidewright.com/parktool-cbw-1c-brake-wrench-8-10mm-open-end_tl5027.html These small, nickel plated wrenches can be used on brakes, derailleurs, etc. The CBW wrenches are nominally 1/8" (3.2mm) thick. 8mm and 10mm open ends http://www.slidewright.com/parktool-cbw-4c-brake-wrench-9-11mm-open-end_tl5028.html http://www.slidewright.com/parktool-cbw-4c-brake-wrench-9-11mm-open-end_tl5028.html These small, nickel plated wrenches can be used on brakes, derailleurs, etc. The CBW wrenches are nominally 1/8" (3.2mm) thick. 9mm and 11mm open ends http://www.slidewright.com/parktool-cc-3-2c-chain-wear-indicator_tl50301.html http://www.slidewright.com/parktool-cc-3-2c-chain-wear-indicator_tl50301.html A worn chain shifts poorly and wears sprockets at an accelerated rate.  The CC-3.2 is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement.  The updated CC-3.2 is longer, more accurate and features permanent measurement markings. http://www.slidewright.com/parktool-ccp-22c-cotterless-crank-puller_tl5031.html http://www.slidewright.com/parktool-ccp-22c-cotterless-crank-puller_tl5031.html The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt Strong rotating tip system ensures smooth operation and long life.NOTE: For cranks using the ISIS Drive or Octalink system, use the CCP-44 or the CWP-7. http://www.slidewright.com/parktool-ccp-44c-billet-spindle-crank-puller_tl5032.html http://www.slidewright.com/parktool-ccp-44c-billet-spindle-crank-puller_tl5032.html The CCP-44 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a “self extracting” system. 22 x 1 mm fine thread provides leverage needed to remove tight crank arms. Strong rotating tip system ensures smooth operation and long life. http://www.slidewright.com/parktool-cg-2-chain-gang-chain-clean-system_tl5035.html http://www.slidewright.com/parktool-cg-2-chain-gang-chain-clean-system_tl5035.html A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings.The Chain Gang includes: CM-5 Chain Scrubber GSC-1 GearClean® Brush 8oz bottle of CB-2 Citrus Chain BriteThe CG-2 works on all derailleur bikes and many 3-speed and coaster brake bikes. http://www.slidewright.com/parktool-cl-1-chain-lube-4oz_lu2055.html http://www.slidewright.com/parktool-cl-1-chain-lube-4oz_lu2055.html A new chain lube from Park Tool, the leader in bicycle maintenance products. Using PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditions. Penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion Also work great on cables, spoke nipples, and derailleur and brake pivots http://www.slidewright.com/parktool-cm-5-cyclone-chain-scrubber_tl5037.html http://www.slidewright.com/parktool-cm-5-cyclone-chain-scrubber_tl5037.html Keeping your chain clean is an essential part of good bike maintenance. The CM-5 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean. Magnet at bottom of solvent reservoir draws particles scrubbed from chain, effectively keeping them from being redistributed on the chain during cleaning Durable sponge material draws solvent from the chain as it exits the Cyclone, reducing drips and mess Works with all multi-speed bikes and some single-speed models http://www.slidewright.com/parktool-ct-2-plier-type-chain-tool_tl5044.html http://www.slidewright.com/parktool-ct-2-plier-type-chain-tool_tl5044.html The CT-2 is designed for fast, easy removal or repair of chains. The tremendous leverage generated removes even the toughest rivets. To use, simply put the chain roller in the built-in recess and squeeze the handles. The travel adjusts to return the rivet back the proper distance. http://www.slidewright.com/parktool-cwp-7c-crank-puller-wrench_tl8521.html http://www.slidewright.com/parktool-cwp-7c-crank-puller-wrench_tl8521.html The universal design of the CWP-7C has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms. The CWP-7 is made for the 22 x 1mm threading in the common cranks. http://www.slidewright.com/parktool-dcw-1c-double-ended-cone-wrench-13-and-14mm_tl5055.html http://www.slidewright.com/parktool-dcw-1c-double-ended-cone-wrench-13-and-14mm_tl5055.html These cone wrenches are designed for the home mechanic or occasional user. They're made of thin steel and are nickel plated and heat treated for long use. Available in four popular sizes from 13mm to 18mm. Their small size makes them ideal to carry along for quick repairs. 13mm and 14mm http://www.slidewright.com/parktool-dcw-2c-double-ended-cone-wrench-15-and-16mm_tl5056.html http://www.slidewright.com/parktool-dcw-2c-double-ended-cone-wrench-15-and-16mm_tl5056.html These cone wrenches are designed for the home mechanic or occasional user. They're made of thin steel and are nickel plated and heat treated for long use. Available in four popular sizes from 13mm to 18mm. Their small size makes them ideal to carry along for quick repairs. 15mm and 16mm http://www.slidewright.com/parktool-dcw-3c-double-ended-cone-wrench-17-and-18mm_tl5057.html http://www.slidewright.com/parktool-dcw-3c-double-ended-cone-wrench-17-and-18mm_tl5057.html These cone wrenches are designed for the home mechanic or occasional user. They're made of thin steel and are nickel plated and heat treated for long use. Available in four popular sizes from 13mm to 18mm. Their small size makes them ideal to carry along for quick repairs. 17mm and 18mm http://www.slidewright.com/parktool-dcw-4c-double-ended-cone-wrench-13-and-15mm_tl5058.html http://www.slidewright.com/parktool-dcw-4c-double-ended-cone-wrench-13-and-15mm_tl5058.html These cone wrenches are designed for the home mechanic or occasional user. They're made of thin steel and are nickel plated and heat treated for long use. Available in four popular sizes from 13mm to 18mm. Their small size makes them ideal to carry along for quick repairs. 13mm and 15mm http://www.slidewright.com/parktool-dp-1-dummy-pedal_tl8595.html http://www.slidewright.com/parktool-dp-1-dummy-pedal_tl8595.html Many new bikes do not include pedals.  The DP-3 Dummy Pedal quickly installs to take the place of a pedal when making adjustments during the assembly of these bikes. Use of the DP-3 is much quicker than threading a pedal into the crank and then unthreading it after the bike is assembled. http://www.slidewright.com/parktool-ek-1-professional-travel-and-event-kit_tl8535.html http://www.slidewright.com/parktool-ek-1-professional-travel-and-event-kit_tl8535.html A carefully selected set of some of our finest tools, housed in the BX-2 Blue Box Tool Case. The EK-1 contains 35 shop level tools fit into BX-2 Blue Box Tool Case with extra room for more tools and parts. Perfect for professional shop and team mechanics, as well as the home mechanic who wants the ultimate portable tool kit.Nominal dimensions of the EK-1: 19" x 14.85" x 8.5" (48.25cm x 37.7cm x 21.6cm). http://www.slidewright.com/parktool-fr-1c-freewheel-remover-shim-sun-race_tl5063.html http://www.slidewright.com/parktool-fr-1c-freewheel-remover-shim-sun-race_tl5063.html Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits Shimano®, Sachs Aris® and Sun Race® freewheels The FR-1 has 12 splines and is approximately 22.6mm in diameter. http://www.slidewright.com/parktool-fr-2c-freewheel-remover-sun-tour-2-notch_tl5064.html http://www.slidewright.com/parktool-fr-2c-freewheel-remover-sun-tour-2-notch_tl5064.html Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside. Not recommended for Sun Tour four to six notch freewheels Always use a skewer or axle nut to hold remover firmly in place http://www.slidewright.com/parktool-fr-3c-freewheel-remover-sun-tour-4-notch-86_tl5065.html http://www.slidewright.com/parktool-fr-3c-freewheel-remover-sun-tour-4-notch-86_tl5065.html Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits all Sun Tour four notch freewheels since 1986. The FR-3 has 4 notches approximately 24mm across. Always use a skewer or axle nut to hold tool in place for during removal. http://www.slidewright.com/parktool-fr-6c-freewheel-remover-bmx_tl5069.html http://www.slidewright.com/parktool-fr-6c-freewheel-remover-bmx_tl5069.html Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads. The FR-6 has four notches approximately 32mm across measured inside to inside. Always hold the remover secure to the hub using axle nut or quick release skewer. http://www.slidewright.com/parktool-ftb-1-frame-fork-tube-brush_tl5289.html http://www.slidewright.com/parktool-ftb-1-frame-fork-tube-brush_tl5289.html All purpose cleaning and scrubbing brush designed to reach where no brush has gone before. The FTB-1 is 35" (89cm) long and features a vinyl dipped shaft and dual density handle for an extra strong grip. Perfect for suspension work, frame tube cleaning, and anything else that needs an extra long brush.  http://www.slidewright.com/parktool-gsc-1c-gearclean-brush_tl5080.html http://www.slidewright.com/parktool-gsc-1c-gearclean-brush_tl5080.html Park Tool’s GSC-1 GearClean® Brush has a unique design. A large comfortable handle with a curved, toothed-end reaches dirt deep between the gears, and tough nylon bristles clean the derailleur and chain. http://www.slidewright.com/parktool-gsc-2-replacement-brush-for-gsc-1c_tl5081.html http://www.slidewright.com/parktool-gsc-2-replacement-brush-for-gsc-1c_tl5081.html Park Tool’s GSC-2 GearClean® Replacement Brush for the GSC-1 GearClean® Brush. http://www.slidewright.com/parktool-hcw-11-adjustable-cup-wrench_tl8315.html http://www.slidewright.com/parktool-hcw-11-adjustable-cup-wrench_tl8315.html The HCW-11 fits "slotted" bottom bracket adjusting cups and cups with "raised" 16mm wrench flats. These are common on older English bicycles, and less expensive bicycles. The opposite end has two ears that are 23mm wide and approximately 5mm wide. http://www.slidewright.com/parktool-hcw-15-32-and-36mm-head-wrench_tl5089.html http://www.slidewright.com/parktool-hcw-15-32-and-36mm-head-wrench_tl5089.html Our popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by high voltage computer controlled lazer technology after heat treat. Waiting until the wrench is heat treated eliminates shrinkage and expansion of the steel after the wrench is sized. It takes longer, and costs more, but it’s worth the extra effort. 32mm and 36mm head wrench http://www.slidewright.com/parktool-hcw-17-fixed-gear-lockring_tl8536.html http://www.slidewright.com/parktool-hcw-17-fixed-gear-lockring_tl8536.html The HCW-17 features two different radius hooks for a precise fit on most fixed-gear lockrings. The HCW-17 has two different ends. Sized to fit rings with an outside diameter of 41, 42, 43, and 44mm. Also fits single speed cassette hubs using lockrings with external notches. 11-5/8” (29cm) in length for excellent leverage. http://www.slidewright.com/parktool-hmr-4-shop-hammer_tl8582.html http://www.slidewright.com/parktool-hmr-4-shop-hammer_tl8582.html The perfect shop hammer! Designed and built specifically for bicycle work, the HMR-4 has a fiberglass shaft, a soft touch rubber grip, and a two-sided head—steel on one side and a replaceable plastic head (part #293) on the other side. 13.5" long (345mm). Steel striking face: 1-3/8" (35mm) diameter Plastic face: 1-11/16" (43mm) diameter http://www.slidewright.com/parktool-ht-10-10mm-hex-tool_tl5305.html http://www.slidewright.com/parktool-ht-10-10mm-hex-tool_tl5305.html Specially designed for cranks, including the Campagnolo® Ultra-Torque, the HT-10 hex tool is designed and built for speed, leverage and comfort. HT tools feature an ergonomically designed screwdriver grip, with an extra long, super strong 10mm hex on one end and a ball driver hex on the other. http://www.slidewright.com/parktool-ht-8-8mm-hex-tool_tl5304.html http://www.slidewright.com/parktool-ht-8-8mm-hex-tool_tl5304.html Specially designed for cranks and pedals, our new HT-8 hex tool is designed and built for speed, leverage and comfort. Perfect for changing rear sprockets or splitting cases. HT tools feature an ergonomically designed screwdriver grip, with an extra long, super strong 8mm hex on one end and a ball driver hex on the other. http://www.slidewright.com/parktool-hw-2-pro-headset-locknut-wrench-32-and-36mm_tl5104.html http://www.slidewright.com/parktool-hw-2-pro-headset-locknut-wrench-32-and-36mm_tl5104.html Most headset wrenches are too thin to use on the top locknut of headsets, particularly aluminum locknuts which can be marred and rounded off very easily. The HW-2 Professional Headset Locknut Wrench is the answer. Fits most 8 point 32mm and 36mm locknuts Thick, semi-box opening Substantial, extra long handle for a firm and precise grip Made of investment cast steel http://www.slidewright.com/parktool-ib-1c-i-beam-mini-hex-screwdriver-set_tl5108.html http://www.slidewright.com/parktool-ib-1c-i-beam-mini-hex-screwdriver-set_tl5108.html Perfect for taking on rides, the strong, compact, lightweight IB-1 features our unique I-Beam handle, and these tools: 3, 4, 5, 6 and 8mm hex wrenches Straight blade screwdriver Weight 3.2 ounces (91 grams) Dimensions 2.87" x 1.2" x 0.64" (75mm x 30mm x 17mm) http://www.slidewright.com/parktool-ib-2c-i-beam-mini-hex-screw-torx-set_tl5109.html http://www.slidewright.com/parktool-ib-2c-i-beam-mini-hex-screw-torx-set_tl5109.html Strong, compact, and lightweight, the IB-2 is a great tool for taking on the road or trail.The IB-2 features our unique I-Beam handle with 10 tools: 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches Star-shaped T25 for fittings of disc rotor bolts Straight blade screwdriver The dimensions are nominally 75mm x 40mm x 18mm Approximate weight is 108 grams http://www.slidewright.com/parktool-ib-3c-i-beam-mini-fold-up_tl5279.html http://www.slidewright.com/parktool-ib-3c-i-beam-mini-fold-up_tl5279.html A complete take-along tool combining our award winning I-Beam technology with a full array of emergency tools: 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches T25 star driver Straight blade screw driver Composite wrapped tire lever two spoke wrenches One size equal to SW-0, black, for 3.23mm nipples Second size equal to SW-2, red, for 3.45mm nipples 10-speed compatible chain tool Nominal dimensions: 3.5" x 1.6" x 1" (90mm x 40mm x 25mm) Weight 6 ounces (170 grams) http://www.slidewright.com/parktool-mg-1-nitrile-mechanic-s-gloves-box-of-100-or-packs-of-10_tl511glove.html http://www.slidewright.com/parktool-mg-1-nitrile-mechanic-s-gloves-box-of-100-or-packs-of-10_tl511glove.html MG-1 Nitrile Gloves keep hands free of grime and protected from potentially harmful chemicals and solvents. MG-1 Nitrile Gloves are thin enough to maintain finger dexterity, yet tough enough to resist snags. They provide superior fit, are easy to slip on and off, and can even be re-used. Sizes M, L, and XL. Box of 100 or by 10 packs. http://www.slidewright.com/parktool-mtb-3c-rescue-tool-22-functions_tl5117.html http://www.slidewright.com/parktool-mtb-3c-rescue-tool-22-functions_tl5117.html The MTB-3 Rescue Tool is a premium quality multi-tool with the design and innovative features you’d expect from the top name in bicycle tools. Manufactured to the highest standards, all tools are finely polished stainless steel or nickel plated steel. Includes nylon carrying case with embroidered Park Tool logo.Tools included: Chain tool Tire levers (2) Phillips head screwdriver Straight blade screwdriver T25 star-shaped driver 1.5, 2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches 8, 9, and 10mm box end wrenches Bottle opener 0.127", 0.130", & 0.136" spoke wrenches Pedal wrench Serrated knife http://www.slidewright.com/parktool-mtb-7c-rescue-tool-21-functions_tl5118.html http://www.slidewright.com/parktool-mtb-7c-rescue-tool-21-functions_tl5118.html An outstanding value, the quality MTB-7 Rescue Tool is packed with 21 useful tools for emergency repairs on the road or trail. Includes nylon carrying case with embroidered Park Tool logo. Tools included: 2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches Tire levers (2) Phillips head screwdriver Straight blade screwdriver T25 star-shaped driver 0.127", 0.130", & 0.136" spoke wrenches 8, 9, & 10mm box end wrenches Chainring nut wrench Dust cap remover Serrated knife Bottle opener http://www.slidewright.com/parktool-mw-set-metric-wrench-set-x10-6-15mm_tl5307.html http://www.slidewright.com/parktool-mw-set-metric-wrench-set-x10-6-15mm_tl5307.html World famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from Chrome Vanadium Steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful! Includes 10 12-point box/open end wrenches, from 6mm to 15mm http://www.slidewright.com/parktool-np-6-needle-nose-pliers_tl8603.html http://www.slidewright.com/parktool-np-6-needle-nose-pliers_tl8603.html Professional quality 6” needle nose pliers with five different crimping/grasping areas and a cutting blade.   Forged, heat-treated cro-moly steel with an invisible spring and soft touch dual density grips.  http://www.slidewright.com/parktool-obw-3c-offset-brake-wrench-14mm_tl5121.html http://www.slidewright.com/parktool-obw-3c-offset-brake-wrench-14mm_tl5121.html We call these our offset wrenches because of their unique design, which allows them to be used in tight places, such as centering caliper brakes. OBW-3 has a 14mm opening, and the other end fits into the tension springs to rotate the brake on its bolt. http://www.slidewright.com/parktool-paw-12-12-adjustable-wrench_tl5288.html http://www.slidewright.com/parktool-paw-12-12-adjustable-wrench_tl5288.html Big and powerful, the PAW-12 adjustable wrench is forged from carbon steel and chrome plated. Jaws open to 36mm Comfortable vinyl dipped handle Features a laser engraved measurement scale http://www.slidewright.com/parktool-pcs-12-bench-mount-repair-stand_tl5298.html http://www.slidewright.com/parktool-pcs-12-bench-mount-repair-stand_tl5298.html A bench mount version of our popular PCS-10 Home Mechanic Repair Stand. Quick adjusting cam-type clamp fits tubes up to 76mm and rotates 360 degrees for easy access to any part of bike Fully adjustable clamping pressure to prevent damage to thin walled tubes Mounts to any flat surface (mounting bolts not included) http://www.slidewright.com/parktool-pcs-4-1-deluxe-home-mechanic-stand-100-5c-clamp_tl5125.html http://www.slidewright.com/parktool-pcs-4-1-deluxe-home-mechanic-stand-100-5c-clamp_tl5125.html The PCS-4 is a heavy duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock solid, four-point leg system that folds together for storage, steel powder coated tubing, and a composite horizontal tube. PCS-4-1 uses the 100-5C Adjustable Linkage Clamp. Clamp rotates 360º and is adjustable in height up to 67” (170cm) Adjusts quickly from 55" to 72" http://www.slidewright.com/parktool-pcs-9-economy-home-repair-stand_tl5126.html http://www.slidewright.com/parktool-pcs-9-economy-home-repair-stand_tl5126.html The new PCS-9 offers Park Tool quality in an entry level repair stand for the home mechanic. The PCS-9 works well for many recumbents and bikes with odd shaped tubing.  Screw type clamp adjusts to fit tubes of various shapes from 7/8" to 3" (24mm to 76mm) Height adjusts from 39"to 57" (99cm to 145cm) Clamp rotates 360 degrees for easy access to any part of bike. Will also clamp on aero shaped seat posts Folds to 41” (104cm) for portability and storage http://www.slidewright.com/parktool-pfp-4-pro-mechanic-floor-pump_tl5299.html http://www.slidewright.com/parktool-pfp-4-pro-mechanic-floor-pump_tl5299.html The PFP-4 is a heavy duty floor pump, packed with features and built for years of dependable service: Pump head fits Presta, Schrader and Woods/Dunlop valves Molded base with steel foot pads Oversized handle with “soft touch” rubber grips Extra long high pressure hose Includes ball-inflating needle http://www.slidewright.com/parktool-ph-1-p-handled-hex-wrench-set_tl5127.html http://www.slidewright.com/parktool-ph-1-p-handled-hex-wrench-set_tl5127.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Includes 2, 2.5, 3, 4, 5, 6, 8 and 10mm sizes Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications Included holder easily mounts to wall or bench http://www.slidewright.com/parktool-ph-10-hex-wrench-10mm_tl5128.html http://www.slidewright.com/parktool-ph-10-hex-wrench-10mm_tl5128.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-11-hex-wrench-11mm_tl5250.html http://www.slidewright.com/parktool-ph-11-hex-wrench-11mm_tl5250.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-12-hex-wrench-12mm_tl5251.html http://www.slidewright.com/parktool-ph-12-hex-wrench-12mm_tl5251.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-2-hex-wrench-2mm_tl5242.html http://www.slidewright.com/parktool-ph-2-hex-wrench-2mm_tl5242.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-2-5-hex-wrench-2-5mm_tl5243.html http://www.slidewright.com/parktool-ph-2-5-hex-wrench-2-5mm_tl5243.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-3-hex-wrench-3mm_tl5244.html http://www.slidewright.com/parktool-ph-3-hex-wrench-3mm_tl5244.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-4-hex-wrench-4mm_tl5245.html http://www.slidewright.com/parktool-ph-4-hex-wrench-4mm_tl5245.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-5-hex-wrench-5mm_tl5246.html http://www.slidewright.com/parktool-ph-5-hex-wrench-5mm_tl5246.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-6-hex-wrench-6mm_tl5247.html http://www.slidewright.com/parktool-ph-6-hex-wrench-6mm_tl5247.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-8-hex-wrench-8mm_tl5248.html http://www.slidewright.com/parktool-ph-8-hex-wrench-8mm_tl5248.html These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long life. Special “speed bearing”attachment facilitates installation and removal of long-threaded socket head bolts and nuts. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Long shaft of each wrench fitted with Bondhus Balldriver tip Short end is chamfered for high torque applications http://www.slidewright.com/parktool-ph-t1-torx-wrench-set-of-8-t6-t40_tl8545.html http://www.slidewright.com/parktool-ph-t1-torx-wrench-set-of-8-t6-t40_tl8545.html A set of professional quality, star-shaped wrenches to fit Torx®-style fasteners.  Includes T6, T8, T10, T15, T20, T25, T30 and T40 sizes. Offset P-handle made from durable nylon and ergonomically designed for comfortable use Made from through-hardened, high torque industrial steel for long life and precision fit Also available as individual wrenches using part numbers: PH-T6 PH-T8 PH-T10 PH-T15 PH-T20 PH-T25 PH-T30 PH-T40 http://www.slidewright.com/parktool-ph-t10-t10-torx-wrench_tl8303.html http://www.slidewright.com/parktool-ph-t10-t10-torx-wrench_tl8303.html Our comfortable P-handle with a star-shaped T10 for the small fittings on some hydraulic brakes. http://www.slidewright.com/parktool-ph-t20-t20-torx-wrench_tl8305.html http://www.slidewright.com/parktool-ph-t20-t20-torx-wrench_tl8305.html Our comfortable P-handle with a star-shaped T20. http://www.slidewright.com/parktool-ph-t25-t25-torx-wrench_tl8306.html http://www.slidewright.com/parktool-ph-t25-t25-torx-wrench_tl8306.html Our comfortable P-handle with a star-shaped T25 for the fittings for bolt heads found on many disc brake calipers and rotors. Includes “Speed Bearing” attachment for fast installation and removal of long threaded bolts. Wrench is made from Bondhus Protanium™ high torque industrial steel for long life. http://www.slidewright.com/parktool-ph-t30-t30-torx-wrench_tl8307.html http://www.slidewright.com/parktool-ph-t30-t30-torx-wrench_tl8307.html Our comfortable P-handle with a star-shaped T30. Fits some chainring bolts. http://www.slidewright.com/parktool-ph-t40-t40-torx-wrench_tl8308.html http://www.slidewright.com/parktool-ph-t40-t40-torx-wrench_tl8308.html Our comfortable P-handle with a star-shaped T40. http://www.slidewright.com/parktool-ph-t6-t6-torx-wrench_tl8301.html http://www.slidewright.com/parktool-ph-t6-t6-torx-wrench_tl8301.html Our comfortable P-handle with a star-shaped T6 for the small fittings on some hydraulic brakes. http://www.slidewright.com/parktool-ph-t8-t8-torx-wrench_tl8302.html http://www.slidewright.com/parktool-ph-t8-t8-torx-wrench_tl8302.html Our comfortable P-handle with a star-shaped T8 for the small fittings on some hydraulic brakes. http://www.slidewright.com/parktool-ppl-1-polylube-1000-grease-4oz_lu2053.html http://www.slidewright.com/parktool-ppl-1-polylube-1000-grease-4oz_lu2053.html Park Tool's poly-urea lubricant was developed specifically for bicycle maintenance and repair. PolyLube 1000 has an extremely high shear strength to protect vital parts under extreme conditions. PolyLube 1000 also repels moisture and is compatible with conventional greases. http://www.slidewright.com/parktool-ppl-2-polylube-1000-grease-1lb-tub_lu2054.html http://www.slidewright.com/parktool-ppl-2-polylube-1000-grease-1lb-tub_lu2054.html Park Tool's poly-urea lubricant was developed specifically for bicycle maintenance and repair. PolyLube 1000 has an extremely high shear strength to protect vital parts under extreme conditions. PolyLube 1000 also repels moisture and is compatible with conventional greases. http://www.slidewright.com/parktool-prs-20-team-race-stand_tl5252.html http://www.slidewright.com/parktool-prs-20-team-race-stand_tl5252.html The new PRS-20 Team Race Stand is a compact, Euro-style work stand that securely holds the bike without clamping the frame tubes or seat post. Ideal for bikes with ultra lightweight frame tubes and seatposts, and for bikes with tight access areas that can't be clamped.Now features a taller bottom bracket saddle to clear the sensor used on power meter (watt measuring) cranksets. Quick release mounts hold bike securely by the front or rear dropouts 360 degree horizontal rotation allows easy access to both sides of bike Folds to 33” (84cm) for easy transport and storage Bottom bracket height quickly adjusts from 28” to 38” (71cm to 96cm) http://www.slidewright.com/parktool-prs-7-1-bench-mount-stand-w-100-5c_tl8559.html http://www.slidewright.com/parktool-prs-7-1-bench-mount-stand-w-100-5c_tl8559.html Easily mounted on any workbench. Uses the 100-5C adjustable linkage clamp. Mounting flange has four holes, allowing use of bolts or lag bolts to mount. Durable powder coated finish. (Mounting bolts not included). http://www.slidewright.com/parktool-pw-3-pedal-wrench-15mm-and-9-16_tl5149.html http://www.slidewright.com/parktool-pw-3-pedal-wrench-15mm-and-9-16_tl5149.html Made from Cro-Moly steel for a shop quality pedal wrench made to last. 15mm and 9/16” precision openings and a long, round, vinyl dipped handle that won’t dig into your hand like flat pedal wrenches. http://www.slidewright.com/parktool-pw-4-professional-pedal-wrench_tl5150.html http://www.slidewright.com/parktool-pw-4-professional-pedal-wrench_tl5150.html The PW-4 Professional Pedal Wrench is designed for heavy shop use. An oversized, asymmetrical head is made from Cro-Moly steel for superior strength and durability. While strong, the PW-4 is thin enough to access all wrench flats.  Two 15mm wrench openings at 30 degree and 45 degree angles for best mechanical advantage, regardless of pedal position Round vinyl dipped handle won’t dig into the hand like flat wrenches Extra long 14” handle provides the leverage to remove even the tightest pedals NOTE: Some pedals will have no wrench flats outboard of the crank. These pedals will use a hex socket fitting behind the axle. http://www.slidewright.com/parktool-pw-5-home-mechanic-pedal-wrench_tl5151.html http://www.slidewright.com/parktool-pw-5-home-mechanic-pedal-wrench_tl5151.html The PW-5 is perfect for the home workshop or event tool box. Although economically priced, this 15mm pedal wrench, like all Park Tool products, is built to last. Made from heat-treated spring steel and vinyl dipped for comfort. 11 1/2” (29 cm) long. http://www.slidewright.com/parktool-rbs-5c-replacement-brush-set-for-cm-5_tl5152.html http://www.slidewright.com/parktool-rbs-5c-replacement-brush-set-for-cm-5_tl5152.html The Cyclone Chain Scrubber brushes are replaceable. The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks. http://www.slidewright.com/parktool-sa-3-deluxe-shop-apron_cl1052.html http://www.slidewright.com/parktool-sa-3-deluxe-shop-apron_cl1052.html Once you try on this apron, there's no going back to standard aprons. An embroidered Park Tool logo makes the apron as good looking (even when it's dirty) as it is functional. 3 lower pockets, each 7.25" wide and 7.5" deep (18.5 cm x 19 cm) 4 upper pockets, each 4.25" (11cm) deep Upper pockets may be unbuttoned to swing when the user bends over to keep items in pockets A full 35" in length, the bottom 7" of the apron can be snapped up for a custom height fit. SA-3 has three lower pockets. Each lower pocket is 18.5cm wide and 19cm deep (7.25" x 7.5") 4 upper pockets, each 11cm deep. http://www.slidewright.com/parktool-sbc-1-spoke-bearing-cotter-gauge_tl5158.html http://www.slidewright.com/parktool-sbc-1-spoke-bearing-cotter-gauge_tl5158.html This handy shop aid is ideal for sizing spokes, ball bearings and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. Has both metric and fractional spoke length markings Anodized aluminum with embossed markings to allow easy reading and long life http://www.slidewright.com/parktool-sbs-1-socket-and-bit-set_tl8299.html http://www.slidewright.com/parktool-sbs-1-socket-and-bit-set_tl8299.html The SBS-1 is a shop quality set of sockets, hex bits and Torx® style bits for the bike mechanic. Ideal for use with Park Tool Torque Wrenches, the SBS-1’s 3/8” drive bits and sockets are made from tough, chrome vanadium steel for long life. Includes: 3, 4, 5, 6, 8 and 10mm hex bits T25, T30 and T40 Torx® style bits 8, 9, 10, 11, 12, 13, 14, 15mm and 1” sockets (The 1” socket fits various Park Tool Freewheel, Cassette Lockring, and Bottom Bracket tools) Convenient bit and socket holder All sockets and bits are 3/8" drive http://www.slidewright.com/parktool-sd-0-screwdriver-0-phillips_tl5284.html http://www.slidewright.com/parktool-sd-0-screwdriver-0-phillips_tl5284.html Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.The #0 is a 1/8" shaft, for those small computer cross-tip screws and many hydraulic brake reservoir caps. http://www.slidewright.com/parktool-sd-2-screwdriver-2-phillips_tl5285.html http://www.slidewright.com/parktool-sd-2-screwdriver-2-phillips_tl5285.html Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.The #2 is a 1/4" shaft, perfect for derailleur adjustmenet screws. It is the most common cross tip ("Phillips") required. http://www.slidewright.com/parktool-sd-3-shop-screwdriver-3mm-flat_tl5313.html http://www.slidewright.com/parktool-sd-3-shop-screwdriver-3mm-flat_tl5313.html Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts. http://www.slidewright.com/parktool-sd-6-screwdriver-6mm-flat-blade_tl5286.html http://www.slidewright.com/parktool-sd-6-screwdriver-6mm-flat-blade_tl5286.html Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts. http://www.slidewright.com/parktool-sd-set-shop-screwdriver-set-of-4_tl5314.html http://www.slidewright.com/parktool-sd-set-shop-screwdriver-set-of-4_tl5314.html Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.The SD-SET includes all four of our shop grade screwdrivers in one handy set: SD-0: #0 Phillips SD-2: #2 Phillips SD-3: 3mm Flat Blade SD-6: 6mm Flat Blade http://www.slidewright.com/parktool-sk-1-home-mechanic-starter-kit_tl5316.html http://www.slidewright.com/parktool-sk-1-home-mechanic-starter-kit_tl5316.html A great way to start a tool collection! The perfect combination of tools to help the novice home mechanic clean, adjust, maintain and do some basic repairs on their bike. The SK-1 includes 14 genuine Park Tool products plus a custom Park Tool toolbox. http://www.slidewright.com/parktool-sp-7-side-cutter-pliers_tl8605.html http://www.slidewright.com/parktool-sp-7-side-cutter-pliers_tl8605.html Professional quality 7” diagonal/side cutting pliers with soft touch dual density grips.  Made from forged, heat-treated, Cro-Moly steel. http://www.slidewright.com/parktool-spa-6c-adjustable-pin-spanner_tl5174.html http://www.slidewright.com/parktool-spa-6c-adjustable-pin-spanner_tl5174.html This spanner uses hardened, replaceable pins approximately 2.2mm in diameter. Designed for heavy duty use, the distance between the pins is adjustable, allowing use on virtually all hanger cups using pin holes. http://www.slidewright.com/parktool-ss-15c-single-speed-spanner_tl8300.html http://www.slidewright.com/parktool-ss-15c-single-speed-spanner_tl8300.html Designed and built especially for single speed bikes, the SS-15 is a forged, multi-purpose ride saver. Just the right size and length (17cm/7”) to take along or to wrench in the garage, the SS-15 is destined to be a single speeder’s favorite.Includes: 15mm socket wrench for axle nuts 15mm open end wrench for pedals Tire lever Bottle opener http://www.slidewright.com/parktool-st-3c-3-way-socket-wrench-8-9-10mm_tl5317.html http://www.slidewright.com/parktool-st-3c-3-way-socket-wrench-8-9-10mm_tl5317.html The three most common bolt and nut sizes are combined with the classic Park Tool 3-way “Y” body. 8mm, 9mm, and 10mm forged CR-V steel sockets. http://www.slidewright.com/parktool-sw-0c-spoke-wrench-black-127_tl5179.html http://www.slidewright.com/parktool-sw-0c-spoke-wrench-black-127_tl5179.html Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of four colors indicating the size at a glance.SW-0 is sized for 0.127" (3.23mm) nipples. http://www.slidewright.com/parktool-sw-13c-spoke-wrench-for-mavic_tl5277.html http://www.slidewright.com/parktool-sw-13c-spoke-wrench-for-mavic_tl5277.html Comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic® fittings, including the Mavic® SSC Ksyrium and Crossmax SLR wheels. The smaller end fits the integrated nipples with 5.65mm OD splines, and 7mm thread size nipple.  The larger end fits the 9mm spline OD of the threaded eyelets of the "FORE drilled rim adapters" found on rims such as the Mavic® XM819, EX823 and Speedcity wheels. http://www.slidewright.com/parktool-sw-14-spoke-wrench-for-shimano_tl5278.html http://www.slidewright.com/parktool-sw-14-spoke-wrench-for-shimano_tl5278.html Two-sided and vinyl dipped, featuring 4.3mm and 4.4mm openings for Shimano Wheel System nipples at the hub.For Shimano wheels with red square nipples at the rim, consider the SW-3. http://www.slidewright.com/parktool-sw-1c-spoke-wrench-green-130_tl5180.html http://www.slidewright.com/parktool-sw-1c-spoke-wrench-green-130_tl5180.html Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of four colors indicating the size at a glance.The SW-1 is sized for .130” (3.30mm) nipples. http://www.slidewright.com/parktool-sw-2c-spoke-wrench-red-136_tl5181.html http://www.slidewright.com/parktool-sw-2c-spoke-wrench-red-136_tl5181.html Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches are vinyl coated in one of four colors indicating the size at a glance.The SW-2 is sized for .136” (3.45mm) nipples. http://www.slidewright.com/parktool-sw-42-four-sided-spoke-wrench-136_tl5276.html http://www.slidewright.com/parktool-sw-42-four-sided-spoke-wrench-136_tl5276.html Unique four-sided design provides extra strength and support and helps prevent slipping and deformation of aluminum nipples. Uses the same world famous design and high quality materials as our three-sided spoke wrenches.The SW-42 is the same 3.45mm (0.136") size as the SW-2 (red). http://www.slidewright.com/parktool-tl-1-tire-lever-set-of-3_tl8568.html http://www.slidewright.com/parktool-tl-1-tire-lever-set-of-3_tl8568.html Sold in sets of three, Park Tool Tire Levers are made of nylon to ensure long life and damage-free operation. The unique design of the TL-1 actually lifts the tire away from the rim and keeps the tube from being pinched. http://www.slidewright.com/parktool-ts-2-2-professional-truing-stand_tl8525.html http://www.slidewright.com/parktool-ts-2-2-professional-truing-stand_tl8525.html The world’s most popular wheel truing stand and the standard of the bicycle industry for 35 years is now, more than ever, the stand to choose for daily shop use. The new TS-2.2 combines time-tested functions from the legendary TS-2 with new features to make it more accurate and versatile than ever. Longer, stronger uprights to accept wheels up to 29” with or without tire Taller, more accurate calipers accept rim widths up to 4” Accepts hub widths up to 175mm Nickel chrome plated heavy gauge steel Stronger, more comfortable knobs Removable/replaceable composite caliper tips protect painted rims Uprights move simultaneously to accommodate front and rear wheels Spring-loaded calipers and caliper arm prevent binding Smooth, accurate operation http://www.slidewright.com/parktool-tw-5-small-clicker-torque-wrench_tl8297.html http://www.slidewright.com/parktool-tw-5-small-clicker-torque-wrench_tl8297.html With today’s lightweight components, torque wrench use in the shop is no longer an option—it’s a must for every mechanic. The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component’s threaded fastener(s). Comes with its own protective case. Ratcheting ¼” drive with 3/8” adaptor Dial-adjust system allows desired torque setting to be preset. 3-15 Newton Meter range (26-132 Inch Pounds) Adjustable to 0.4 Nm increments Conversion scale on tool body 19.5cm (7 ½”) lengthNOTE: Torque wrenches are measuring instruments and are not intended for use as a general-purpose ratcheting driver. Do not exceed 15Nm when using the TW-5. http://www.slidewright.com/parktool-tw-6-big-clicker-torque-wrench_tl8298.html http://www.slidewright.com/parktool-tw-6-big-clicker-torque-wrench_tl8298.html With today’s lightweight components, torque wrench use in the shop is no longer an option—it’s a must for every mechanic. The TW-6 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component’s threaded fastener(s). Comes with its own protective case. Ratcheting 3/8” drive Dial-adjust system allows desired torque setting to be preset 10-60 Newton Meter range (88-530 Inch Pounds) Adjustable to 0.2 Nm increments 38cm (15”) length http://www.slidewright.com/parktool-tws-2c-fold-up-torx-wrench-set_tl5214.html http://www.slidewright.com/parktool-tws-2c-fold-up-torx-wrench-set_tl5214.html The use of Star-shaped fittings on disc brakes, pedals, chainring bolts, etc. are becoming increasingly popular. The TWS-2 combines the Torx®-style wrench sizes currently being used on bicycle components in a convenient fold-up set. Includes T7, T9, T10, T15, T20, T25, T27, T30 and T40 wrenches Made from Bondhus Protanium™ high torque industrial steel for long life Multi-position composite handle is lightweight, slip-resistant, and 40% stronger than steel handles http://www.slidewright.com/parktool-tws-3c-torx-compatible-3-way-wrench_tl8609.html http://www.slidewright.com/parktool-tws-3c-torx-compatible-3-way-wrench_tl8609.html The TWS-3 is a Torx®  compatible 3-way wrench. T10, T25 and T30 wrench sizes in our classic three-way “Y” design. Useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). http://www.slidewright.com/parktool-wag-3-portable-wheel-dishing-gauge_tl5215.html http://www.slidewright.com/parktool-wag-3-portable-wheel-dishing-gauge_tl5215.html For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished”. To check this, and to make precision adjustments, a wheel alignment gauge (also called a “dishing tool”) is a must. An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand. Fits 26 inch, 27 inch, and 700C wheels