Snow temperature -3 to 0 degrees C (27 to 32 degrees F) and above. For quick application spray the wax on the base and spread immediately using a cork or felt, rubbing and pressing. Wait 10 minutes for the wax to harden, then polish the base with a manual horsehair or nylon brush. Paraffin Ski and Snowboard Wax Spray, 50ml. Ideal for training and leisure, and racing use in the presence of low humidity (0 - 30 percent). Apply by spraying at least 3 times to cover roughly 15cm of the base and immediately spread the wax in this area using a cork or felt, rubbing and pressing. Repeat these two steps covering the entire base. With very abrasive snow (ie. man-made) we recommend melting the wax by passing an iron over the base, once or twice, with a sheet of teflon between the iron and base (iron temperature 130 - 160 degrees C). Immediately roll the waxed base using the cork roller fitted on a drill (1000 - 2000 rpm) using light pressure. Wait at least 10 minutes for the wax to harden, then free the base structure with a stiff manual or roto horsehair or nylon brush, then polish the base structure with a soft manual or soft roto horsehair or nylon brush.