Combi alpine, (5),180 gram bars, one bar each of LF4, LF6 & LF7, with 2 bars LF8.  LF stands for Low Fluorocarbon. The temperature ranges and wax colors of the LF waxes coincide with the HF category.

8 mm plate gives a stable temperature. Adjustment range from 100°C to 165°C. 500 Watt.

Three-piece aluminum nordic profile to put in wax box. Ideal for traveling and to provide secure waxing conditions.

13 Tpi. World Cup Racing Pro file. Stainless steel. Extremely sharp high quality file for edge geometry set up. New generation of files that lasts 10 times as long as regular files.

17 Tpi. World Cup Racing Pro file. Stainless steel. Extremely sharp fine high quality file for edge geometry set up. New generation of files that lasts 10 times as long as regular files.

(Description forthcoming.)

Basic kit with XF40 fluorinated glide wax, TA3001 pocket size file holder and Fibertex T268 for polish.

100 grit. Deburring and sharpening diamond stone. Works great for removing case hardening in the tip and tail from grinding stone entry and exit of the ski at the manufacturing facility, and from hitting rocks.

1000 grit. Final diamond polish when looking for that mirror finish. Extremely exact edge accuracy. Used on alpine skis to achieve that super smooth finish.

For very wet, saturated snow. This is the Worlds most frequently used wax for base prep/saturation and as travel wax for warm skis. +10ºC to 0ºC (50ºF to 32ºF).

A pure white hydrocarbon powder for very cold conditions. Can be used alone or as a base for other waxes during abrasive conditions. -12ºC to -32ºC (12ºF to -26ºF).

To be heated with blowtorch. Used for smoothing out klister or hardwaxes when working outside at race cite.

High quality and durable deburring, sharpening and polishing diamond stones. Order individually or in sets with specified grits.

CH4 is slightly harder than HF4 and LF4. Can be used alone or mixed with other LF or HF waxes to increase durability on aggressive snow. -10ºC to -32ºC (14ºF to -25ºF).

For common cold conditions. Contains also some synthetic wax, which makes it durable in aggressive snow. Good training wax alone. -6ºC to -12ºC (21ºF to 10ºF).

CH7 is a good general purpose pre-wax and travel wax because its range for use falls in the middle of the Cera Nova system.  -2ºC to -8ºC (28ºF to 18ºF).

(Description forthcoming)

Chromed coarse, multicut side-edge bevelling guide Specialty file. List Price: $20.00

F4 high quality water-repellant fluoro wax for skis and snowboards. For all snow conditions. Apply and go! Liquid with applicator.

CH4 is slightly harder than HF4 and LF4. Can be used alone or mixed with other LF or HF waxes to increase durability on aggressive snow. In dry conditions can it be used up to -5ºC. -10ºC to -32ºC (14ºF to -25ºF)